Videos
Applying a Finish to your Guitar
Applying Dingotone
High Gloss Finish
Applying Headstock Decal
Shaping the Headstock
Sanding the Guitar Body
Download PDF Instructions Here Wiring the Pickups
Introduction to Soldering
SOLDERING PICK-UPS ON A TL-1
Download PDF Instructions Here SOLDERING PICK-UPS TO A ST-1
Download PDF Instructions Here SOLDERING PICK-UPS TO A SSC-1 OR MB-1
Download PDF Instructions Here EARTHING A DOUBLE HUMBUCKER
Download PDF Instructions Here SOLDERING PICK-UPS TO AN EX-1
Download PDF Instructions Here SOLDERING PICK-UPS TO A SV-1
Download PDF Instructions Here SOLDERING PICK-UPS TO A SG-1
Download PDF Instructions Here Fitting the hardware
FITTING PICK-UPS AND CONTROLS TO A TL-1
FITTING THE SCRATCH PLATE AND HARDWARE TL-1
FITTING IN-LINE MACHINE HEADS
FITTING 3-A-SIDE MACHINE HEADS (TUNERS)
FITTING THE BRIDGE TO A TL-1
FITTING THE BRIDGE TO A SV-1
Final Assembly
NECK MEASUREMENT
ATTACHING A SCREW-ON NECK (ST-1, TL-1, SV-1, MB-1)
FITTING STRAP HOLDERS
FITTING STRINGS AND STRING GUIDES
FITTING STRINGS TO A SV-1
Setting up and tuning
SETTING UP YOUR PIT BULL GUITAR (ACTION)
SETTING UP YOUR PIT BULL GUITAR (INTONATION)